Fishing Bait Boat Mold

Project Profile

Sunnymold Project: Fishing Bait Boat, Intelligent Remote Control Nest Ship Fishing Boat

Mold Category：Electronic Products Molds

Product Parameters

Product name: Fishing Bait Boat, Intelligent Remote Control Nest Ship Fishing Boat

Size: 49cm*27cm*16cm

Weight: self-weight 1.6 kg, load 1.5 kg

Material: ABS imported engineering materials

Power: 5200 mAh lithium battery

Product Advantages

Wireless remote control

Sonar fishing

pinpoint

Integrated remote control

Waterproof

Obstacle avoidance

Products Features and Application

Dual-mode wireless remote control, using 433MHZ and 2.4G WIFI dual-mode control mode, while meeting the characteristics of data bandwidth and transmission stability, can be as far as 1000 meters (note) transmission distance.

Dual-frequency sonar fish detection, using the design of dual-probe with sonar frequencies of 125 KHz and 200 KHz, can achieve more accurate detection resolution and maximum detection depth of 100 meters. Intelligent identification of large and medium-sized fish, fish layer accuracy resolution of 0.1 meters, and accurate identification of river bed structure.

Dual-satellite positioning system uses GPS and Beidou satellite dual positioning system to store and transfer information of 24 points more accurately and quickly. It can realize automatic navigation and navigation of each position.

Electronic compass + electronic gyroscope, equipped with electronic compass and gyroscope, can more accurately and quickly control the direction of the ship, and better maintain the ship's attitude.

Product Details

FAQ

What aspects should we start with in the design of injection molds?

For injection mold designers, how to design the injection mold with optimized structure as soon as possible according to the drawings or product requirements is the top priority.

There are many factors to be considered in the design of injection mold, such as the type of plastics, the characteristics of plastic parts, the number of cavity, the type of injection machine and the feasibility of the processing technology of injection mold, etc.

After a thorough study of these problems, we can begin to design the injection mold. The contents of the injection mold design mainly include the following aspects:

1) Determine the number and arrangement of the cavity;

2) Determine the location and form of parting surface, runner and gate;

3) Disposal of lateral concave and convex and determination of launching mode;

4) Determine the processing mode of the die;

5) Determine the way of temperature adjustment.

From the point of view of the function of injection mold, the design of gating system, forming system, heat exchange system and demolding system should be completed.

http://www.ensunnymold.com/